OBJECTIVE: To evaluate the dose distribution in different situations of high dose-rate endobronchial brachytherapy, focusing especially on high-dose volumes, and try to identify better or worse situations in terms of dose distribution to aid as guidance in the clinical practice. MATERIALS AND METHODS: Theoretical study simulating high dose-rate endobronchial brachytherapy utilizing two catheters, varying the loading extent, angle between the catheters, prescription depth, and source step. With a prescription dose of 7.5 Gy, the volumes involved by the 100%, 150% and 200% isodoses (V100, V150 and V200, respectively) and V150/V100 and V200/V100 ratios were calculated. RESULTS: There was a volume enhancement with larger loaded lengths, increase in prescription depth and angles, with a tendency towards a proportionally smaller increase with larger angulations. In general, the V150/V100 and V200/V100 ratios were homogeneous, respectively around 0.50 and 0.30. CONCLUSION: Overall, the dose distribution in the standard situation was appropriate. No specific parameter that could be related to a higher toxicity was identified. The authors recommend a swift evaluation of the treatment quality through the analysis of the V150/V100 and V200/V100 ratios.

Keywords: Radiotherapy, Endobronchial brachytherapy, Dosimetry

OBJECTIVE: Our purpose was to verify the effect of changes in subject contrast, exposure time and radiation dose when different thicknesses of molybdenum (Mo) and rhodium (Rh) filters are used in mammography equipments. MATERIALS AND METHODS: Entrance skin exposure measurements were performed with an ionization chamber for different thicknesses of Mo and Rh filters. Average glandular dose was determined with a BR12 simulator (50% fat tissue and 50% glandular tissue) of different thicknesses (4 cm and 8 cm). Energies in the range of 24 to 34 kVp and Kodak MinR 2000 films were used. RESULTS: Results have evidenced data on subject contrast data, glandular dose and exposure time for different thicknesses of additional filters and different kVp values. These data have indicated an increase both in values of subject contrast and exposure time when filters thickness is increased. The glandular dose has presented a different behavior tendency for each case analyzed. Equations were defined to allow us to estimate subject contrast, glandular dose and exposure time for the cases studied. CONCLUSION: The results have made possible to define equations to assist with the evaluation of subject contrast and glandular dose behavior in simulators with 4 cm and 8 cm thicknesses and for Rh and Mo additional filters. In this way, it is possible to estimate the figure of merit (subject contrast/glandular dose ratio) to assist in the risk-benefit analysis of the cases studied.

Keywords: Mammography, Radiation exposure, External dosimetry

OBJECTIVE: To present the solidly established traceability structure for ionometric standards and for thermoluminescent dosimetry system that ensures reliability of the Dosimetry Quality Assurance Program and is aimed to certify the highest level of accuracy of the measurements. MATERIALS AND METHODS: Thermoluminescent powder dosimeters (DTL 937) placed into plastic capsules and packed in specific kits for each intended application were mailed to the participant centers. RESULTS: The results of the intercomparisons performed between "Laboratório de Ciências Radiológicas da Universidade do Estado do Rio de Janeiro" and EQUAL-ESTRO for the beam of 60Co gamma rays, expressed for (1sigma), and the results of the dose absorbed measurements obtained with the chambers of the Program EQUAL and the chambers of the Dosimetry Quality Assurance Program were lower than 0.5%. CONCLUSION: Based on these results we concluded that the Dosimetry Quality Assurance Program reached the desired level of reliability to allow its implementation.

Keywords: Quality assurance, Radiotherapy, Dosimetric intercomparison, Thermoluminescent dosimetry, TLD

OBJECTIVE: To compare radiological techniques used in Brazil and in Australia, and to evaluate radiation doses of the most common x-ray procedures. MATERIALS AND METHODS: The entrance skin dose (ESD) and the effective dose (ED) were obtained with the software DoseCal. In both countries the study was conducted in large public hospitals. Four distinct procedures were evaluated: chest, abdomen, pelvis and thoracic spine in three views (anterior-posterior, posterior-anterior and lateral) In Australia, all x-ray equipment are digital and linked with PACS whereas in Brazil conventional equipment is used. RESULTS: The mean values of ESD and ED were consistently higher in Brazil, except for chest x-rays. The higher differences were seen in pelvis (26 fold higher in Brazil) and thoracic spine (43 fold higher in Brazil) radiographs. CONCLUSION: All Australian hospitals have quality assurance programs (QAP) implemented on a permanent basis, the most advanced digital equipment and count with an effective medical physics service. These factors are determinant for high quality images, low rejection rates and low doses imparted to patients when compared to Brazilian standards. Theses results reinforce the need of implementation of quality assurance programs in Brazil. However, when analyzing the results of ESD for chest x-rays, we concluded that low doses can also be achieved in Brazil with the use of appropriate x-ray techniques.

Keywords: Entrance skin dose, Radiodiagnosis, Effective dose, Dosimetry

We analyzed the dose area product (DAP) of 12 patients submitted to videofluoroscopic swallowing studies. The aim of this study was to establish, in a preliminary manner, the values of radiation exposure for patients submitted to this type of examination. A Diamentor equipment was used to register the cumulative radiation doses emitted by the x-ray tubes. Two different rooms with identical radiological equipment were used to collect the data. The protocol used was rigorously the same and the same experienced professional performed the examinations. DAP's values for the three phases (oral, pharyngeal and esophagogastric) of the videofluoroscopic swallowing study were, for the room A (7 patients), 4,101 cGy.cm², DAP/min. = 577 cGy.cm²/min., and for the room B (5 patients), 804 cGy.cm², DAP/min = 119 cGy.cm²/min. These different results were obtained from patients of the same height and weight, using the same examination time (around 7 minutes) for all patients. We concluded that the data showing doses five times lower in room B are more reliable that those obtained for room A and that DAP and DAP/min. are good elements to inform patient doses imparted by videofluoroscopic swallowing examination. We believe that the high dose differences observed between the two groups are due to lack of calibration of the x-ray equipment, since unfortunately "quality assurance programs" are not routinely implemented.

Keywords: Dosimetry, Videofluoroscopy, Dose area product (DAP), Swallowing

We compared chest radiographs using high and low kilovoltage techniques with the aim of obtaining best quality techniques as well as a reduction in patient doses. The study was performed in 48 patients randomized that were submitted to 70 postero-anterior chest radiographs using high (120 kVp, 2.3 mAs) and low (70 kVp, 5-10 mAs) kilovoltage techniques. The entrance skin dose values were measured with a Diamentor. The low kilovoltage technique showed a 326% increase of the dose when compared with the high kilovoltage technique. The use of the high kilovoltage technique decreased the number of low quality radiographs that required repetition, thus sparing the equipment and reducing the costs due to best quality radiographic images.

Keywords: Chest radiographs, Dosimetry, Image quality

The dosimetric parameters of small diameter photon beams of a commercially available radiosurgery system were measured in a water phantom using a p-type Si photon diode. Tissue maximum ratios, total scattering factor and beam profiles at 5 and 10 cm depth were measured for 17 circular beams ranging from 5 mm to 50 mm in diameter, in 1.5 mm steps. The total scattering factor decreased slowly from 0.947 to 0.888 for the cones with diameter between 50 mm and 12.5 mm (7% variation) whereas for cones with diameter between 10 mm and 5 mm the factor decreased more steeply, from 0.854 to 0.666 (28% variation). These tissue maximum ratio data are consistent with the data published by other authors. The beam profiles measured in the x and y directions were aproximately 0.2 mm between the two directions for all cone sizes. The full widths at half maximum were within 1 mm of the nominal cone sizes.

Keywords: Diode detector, Radiosurgery, Photon beam dosimetry

OBJECTIVE: The present study was aimed at characterizing a diamond detector and observing its behavior. MATERIALS AND METHODS: The dosimetric characteristics of 6 MV photon beams were measured by utilizing an automatic PTW MP3 scanning system with a diamond detector, and compared with measurements performed with a PTW 31010 ion chamber. RESULTS: Measurements of dose linearity, dose rate dependence and depth dose distribution as well as dose profiles demonstrated the dosimetric characteristics of the diamond detector. CONCLUSION: Some measurements with diamond detector and ion chamber were validated with results published in the literature, demonstrating a good behavior of the diamond detector as compared with the ionization chamber that is widely utilized for dosimetry in radiotherapy, indicating that the diamond detector is a good choice for small field dosimetry.

Keywords: Diamond; Dosimetry; Radiotherapy.

OBJECTIVE: To estimate extracranial doses on eyes, thyroid, chest and pelvis in patients submitted to radiosurgery with 6 MV linear accelerator. MATERIALS AND METHODS: The present study evaluated 11 patients, 7 of them with primary, and 4 with secondary brain tumors. In the latter group, 2 patients had two lesions. Thermoluminescent dosimeters were utilized to estimate the extracranial dose. Radiosurgery cones ranges between 1.50 and 3.75 cm and doses between 1300 and 2000 cGy. RESULTS: Mean patients' age was 52 years, and 63.6% of them were women and 36.4%, men. Lesion locations were the following: right acoustic nerve (1), frontal (2), parietal (5), right occipital (1), cerebellum (2) and parasagittal (2). Mean received doses were the following: 5.1 cGy between the eyes; 4.8 cGy in the right eye; 6.5 cGy in the left eye; 4.2 cGy in the thyroid; 1.65 cGy in the chest; and 0.45 cGy in the pelvis. CONCLUSION: The results demonstrate that that although the eye doses do not exceed the tolerance limits for occurrence of lens opacity, it is important that the risks associated with radiation doses are taken into consideration by radiotherapists in the planning of cranial radiosurgery procedures.

Keywords: Brain tumor; Radiotherapy; Radiosurgery; Dosimetry.

OBJECTIVE: The present paper is aimed at presenting a comparative dosimetric study of prostate brachytherapy with I-125 and Pd-103 seeds. MATERIALS AND METHODS: A protocol for both implants with 148 seeds was simulated on a heterogeneous three-dimensional pelvic phantom by means of the SISCODES/MCNP5 codes. Dose-volume histograms on prostate, rectum and bladder, dose indexes D₁₀, D₃₀, D₉₀, D_0.5cc, D_2cc and D_7cc, and representations of the spatial dose distribution were evaluated. RESULTS: For a D₉₀ index equivalent to the prescription dose, the initial activity of each I-125 seed was calculated as 0.42 mCi and of Pd-103 as 0.94 mCi. The maximum dose on the uretra was 90% and 108% of the prescription dose for I-125 and Pd-103, respectively. The D_2cc for I-125 was 30 Gy on the rectum and 127 Gy on the bladder; for Pd-103 was 29 Gy on the rectum and 189 Gy on the bladder. The D₁₀ on the pubic bone was 144 Gy for I-125 and 66 Gy for Pd-103. CONCLUSION: The results indicate that Pd-103 and I-125 implants could deposit the prescribed dose on the target volume. Among the findings of the present study, there is an excessive radiation exposure of the pelvic bones, particularly with the I-125 protocol.

Keywords: Radiotherapy; Dosimetry; Prostate cancer; Brachytherapy; SISCODES; MCNP.

OBJECTIVE: Comparative analysis of dosimetry in intracavitary balloon catheter brachytherapy with I-125 and in Cf-252 brachytherapy combined with BNCT for treatment of brain tumors. MATERIALS AND METHODS: Simulations of intracavitary balloon catheter brachytherapy with I-125 and in Cf-252 brachytherapy combined with BNCT were performed with the MCNP5 code, modeling the treatment of a brain tumor on a voxel computational phantom representing a human head. Absorbed dose rates were converted into biologically weighted dose rates. RESULTS: Intracavitary balloon catheter brachytherapy with I-125 produced biologically weighted mean dose rates of 3.2E-11, 1.3E-10, 1.9E-11 and 6.9E-13 RBE.Gy.h^–1.p ^–1.s, respectively, on the healthy tissue, on the balloon periphery and on the I₁ and I₂ tumor infiltration zones. On the other hand, Cf-252 brachytherapy combined with BNCT produced a biologically weighted mean dose rate of 5.2E09, 2.3E-07, 8.7E-09 and 2.4E-09 RBE.Gy.h^–1.p ^–1.s, respectively on the healthy tissue, on the target tumor and on the I₁ and I₂ infiltration zones. CONCLUSION: Cf-252 brachytherapy combined with BNCT delivered a selective irradiation to the target tumor and to infiltration zones, while intracavitary balloon catheter brachytherapy with I-125 delivered negligible doses on the tumor infiltration zones.

Keywords: Brachytherapy; Glioblastoma multiforme; Dosimetry; BNCT; MCNP.

OBJECTIVE: The present study was aimed at estimating the doses received by physicians and patients during cerebral angiography procedures in a public hospital of Recife, PE, Brazil. MATERIALS AND METHODS: The study sample included 158 adult patients, and during the procedures the following parameters were evaluated: exposure parameters (kV, mAs), number of acquired images, reference air kerma value (K_a,r) and air kerma-area product (P_KA). Additionally, the physicians involved in the procedures were evaluated as for absorbed dose in the eyes, thyroid, chest, hands and feet. RESULTS: The results demonstrated that the doses to the patients' eyes region were relatively close to the threshold for cataract occurrence. As regards the physicians, the average effective dose was 2.6 µSv, and the highest effective dose recorded was 16 µSv. CONCLUSION: Depending on the number of procedures, the doses received by the physicians may exceed the annual dose limit for the crystalline lenses (20 mSv) established by national and international standards. It is important to note that the high doses received by the physicians are due to the lack of radiation protection equipment and accessories, such as leaded curtains, screens and protective goggles.

Keywords: Dosimetry; Interventional radiology; Cerebral angiography.

OBJECTIVE: Aiming at contributing to the knowledge on doses in computed tomography (CT), this study has the objective of determining dosimetric quantities associated with pediatric abdominal CT scans, comparing the data with diagnostic reference levels (DRL). MATERIALS AND METHODS: The study was developed with a Toshiba Asteion single-slice CT scanner and a GE BrightSpeed multi-slice CT unit in two hospitals. Measurements were performed with a pencil-type ionization chamber and a 16 cm-diameter polymethylmethacrylate trunk phantom. RESULTS: No significant difference was observed in the values for weighted air kerma index (C_W), but the differences were relevant in values for volumetric air kerma index (C_VOL), air kerma-length product (P_KL,CT) and effective dose. CONCLUSION: Only the C_W values were lower than the DRL, suggesting that dose optimization might not be necessary. However, P_KL,CT and effective dose values stressed that there still is room for reducing pediatric radiation doses. The present study emphasizes the importance of determining all dosimetric quantities associated with CT scans.

Keywords: Pediatric computed tomography scans; Dosimetric quantities; Weighted dose index; Volumetric air kerma index; Air kermalength product.

OBJECTIVE: This article presents a way to obtain estimates of dose in patients submitted to radiotherapy with basis on the analysis of regions of interest on nuclear medicine images. MATERIALS AND METHODS: A software called DoRadIo (Dosimetria das Radiações Ionizantes [Ionizing Radiation Dosimetry]) was developed to receive information about source organs and target organs, generating graphical and numerical results. The nuclear medicine images utilized in the present study were obtained from catalogs provided by medical physicists. The simulations were performed with computational exposure models consisting of voxel phantoms coupled with the Monte Carlo EGSnrc code. The software was developed with the Microsoft Visual Studio 2010 Service Pack and the project template Windows Presentation Foundation for C# programming language. RESULTS: With the mentioned tools, the authors obtained the file for optimization of Monte Carlo simulations using the EGSnrc; organization and compaction of dosimetry results with all radioactive sources; selection of regions of interest; evaluation of grayscale intensity in regions of interest; the file of weighted sources; and, finally, all the charts and numerical results. CONCLUSION: The user interface may be adapted for use in clinical nuclear medicine as a computer-aided tool to estimate the administered activity.

Keywords: Nuclear medicine; Biokinetic distribution; Dosimetric evaluations; Administered activity.

OBJECTIVE: To evaluate the level of ambient radiation in a PET/CT center. MATERIALS AND METHODS: Previously selected and calibrated TLD-100H thermoluminescent dosimeters were utilized to measure room radiation levels. During 32 days, the detectors were placed in several strategically selected points inside the PET/CT center and in adjacent buildings. After the exposure period the dosimeters were collected and processed to determine the radiation level. RESULTS: In none of the points selected for measurements the values exceeded the radiation dose threshold for controlled area (5 mSv/year) or free area (0.5 mSv/year) as recommended by the Brazilian regulations. CONCLUSION: In the present study the authors demonstrated that the whole shielding system is appropriate and, consequently, the workers are exposed to doses below the threshold established by Brazilian standards, provided the radiation protection standards are followed.

Keywords: Dosimetry; Thermoluminescence dosimetry; PET/CT.